Christie LCD projector Manual de usuario descargar pdf (Pagina 43)

Section 4: Adjusting the Image

CP2210 User Manual 4-9

020-100410-08 Rev. 1 (05-2014)

d. Select True in the 3D Sync Polarity list.

e. Enter 430 in the Dark Time field or enter a value appropriate for your 3D hardware.

f. Enter -120 in the Output Delay field or enter a value appropriate for your 3D hardware.

g. Enter 0 in the Phase Delay field or enter a value appropriate for your 3D hardware.

4.11.8 Display 3D Diagnostic Test Patterns

You can use 3D test patterns to verify your 3D hardware is functioning correctly.

1. Tap Menu > Channel Setup.

2. Select a 3D channel in the Channel Name list.

3. Tap 3D Test Patterns.

4. Tap a test pattern.

5. Put on a pair of 3D glasses.

6. Look at the on-screen image, and then close your left eye and look at the image through your right eye.

Switch when the image alternates.

3D Test Pattern Action

RGB-12bit -3D Dynamic Range Alternates between 2 images shown in Figure 4-6.

RGB-12bit-3D Four Quadrant Alternates between 2 images shown in Figure 4-7.

RGB-12bit-3D Full White Alternates between 2 100% white images.

RGB-12bit-3D Half Descending Alternates between 4 images shown in Figure 4-8.

RGB-12bit-3D Horizontal Ramp Alternates between 2 horizontal ramp images.

RGB-12bit-3D L-Pattern Alternates between 2 images shown in Figure 4-9.

Figure 4-6 RGB-12 bit -3D Dynamic Range Test Pattern

100% black field with 100% white (TL),

red (TR), green (BR), blue (BL) boxes

100% black field with 100% red (TL),

white (TR), blue (BR), green (BL) boxes

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 139 140

Sin comentarios

Christie LCD projector Manual de usuario Pagina 43